13″ / 33cm DTF Transfer Film Roll — 100m — Hot or Cold Peel
Compact-Width Production Film
13″ / 33cm DTF Transfer Film — 100m
A full 100-meter roll of single-sided coated PET film for compact DTF printers. Clean feed, sharp detail, and hot-or-cold peel flexibility—small width, serious work.
Why shops choose it
- 13-inch / 33cm width: built for compact-format DTF equipment.
- 100-meter roll: enough runway for repeat production without constant roll changes.
- Single-sided coated PET: designed to receive DTF ink and carry the transfer through powdering, curing, pressing, and peeling.
- Hot or cold peel capability: use the peel method that works best with your tested production settings.
The Fastest Tip
Film hates fingerprints, dust, and guessing. Handle the edges, keep the coated side clean, and test your cure-and-peel settings before the full run. That’s the move.
Best for
Compact DTF printers, small-format transfer production, sampling, short runs, and shops that want a narrower roll without sacrificing a professional workflow.
Production notes
- Confirm roll width and core fit before ordering.
- Print only on the coated side.
- Use compatible ink, powder, curing, and press settings.
- Store the roll sealed, flat or properly supported, away from moisture and direct heat.
- Test peel timing with your exact ink and powder combination.
Build the full 13-inch setup
Pair this film with DTF ink, hot-melt powder, and cleaning solution—or grab a 13-inch bundle and restock in one shot.
Frequently asked questions
Is this film hot peel or cold peel?
The film is designed for hot or cold peeling. Final timing depends on your tested ink, powder, cure, garment, temperature, pressure, and workflow.
Will it fit every 13-inch printer?
Printer feed systems and core requirements vary. Confirm your machine’s supported media width and core before ordering.
Which side do I print on?
Print on the coated side. If you are unsure, verify the roll orientation before loading and run a small test.